Leave Your Message
As Thailand accelerates its transit connectivity, including the Bangkok MRT expansion and the Sino-Thai High-Speed Railway, mitigating track vibration is critical. Below are our top CE-certified polyurethane track components engineered specifically for urban and high-speed rail networks.
Thailand is undergoing a monumental shift in its rail transportation infrastructure. Spearheaded by the State Railway of Thailand (SRT) and the Mass Rapid Transit Authority of Thailand (MRTA), massive projects like the Bangkok Metropolitan Region's MRT lines (Orange, Yellow, Pink, and Brown lines) and the ambitious High-Speed Rail (HSR) links between key airports (Don Mueang – Suvarnabhumi – U-Tapao) are redefining regional connectivity. However, constructing high-speed and heavy-load transit networks within dense urban cores like Bangkok introduces severe challenges related to ground-borne vibration and structural noise.
Bangkok is built on a soft deltaic basin, characterized by a thick layer of soft marine clay (commonly referred to as "Bangkok Clay"). This unique geological condition acts as a low-frequency vibration amplifier. When heavy passenger trains or high-speed rolling stock run on standard ballast or concrete slab tracks, vibrations travel through the soft clay layers with minimal attenuation, reaching the foundations of historic temples, commercial skyscrapers, and residential areas. Without high-performance vibration isolation materials, structure-borne noise can disrupt local communities and threaten structural integrity. This makes CE-certified polyurethane track beds and damping pads an absolute necessity for modern Thai railway engineering.
For Thai railway contractors and municipal planners, compliance with European standards (such as EN 13481 for fastening systems and EN 13146 for testing procedures) is the benchmark for safety and quality. CE Certification guarantees that vibration and noise reduction components retain their dynamic stiffness, fatigue resistance, and environmental stability over decades of continuous operation. As a premier supplier, our products undergo rigorous certification processes to ensure they meet these strict global standards before deployment in Thailand's rail network.
Thailand’s tropical climate presents extreme operational conditions: high relative humidity, seasonal monsoons, and ambient temperatures exceeding 40°C. Traditional natural or synthetic rubber dampeners tend to degrade, stiffen, or lose elasticity under prolonged UV exposure and wet-dry cycles. Our engineered polyurethane microcellular elastomers are chemically optimized to resist hydrolysis, ozone, and oil. They maintain consistent damping performance across a wide temperature range, ensuring a service life that matches the design life of the concrete slab tracks themselves.
Different railway environments demand tailored vibration mitigation strategies. Here is how our CE-certified products are applied across Thailand's diverse railway landscape:
Underground metro lines passing through dense residential zones utilize Metro Floating Slab Track Bed Vibration Isolation Pads. Placed beneath the cast-in-situ concrete slabs, these pads decouple the track structure from the tunnel lining, reducing structure-borne noise by up to 15-25 dB, protecting adjacent buildings from continuous low-frequency hums.
The Sino-Thai High-Speed Railway relies on ballastless prefabricated slab tracks to handle speeds of 250 km/h. Rail Vibration Damping Pads for Prefabricated Slab Tracks are installed to absorb high-frequency dynamic forces, preventing track misalignment and reducing wear on both the rails and the rolling stock's wheelsets.
Connecting deep-sea ports like Laem Chabang with inland container depots (ICD Lat Krabang) requires heavy-haul freight tracks. Heavy axle loads generate high vibration energy. Utilizing high-performance fastening systems and heavy-duty polyurethane pads prevents ballast degradation and reduces maintenance costs along these critical logistics corridors.
Quality assurance is the core of our manufacturing philosophy. Our state-of-the-art Testing Center ensures that every batch of polyurethane vibration isolation pads delivered to Thailand meets international railway standards.
The Changmei Testing Center conducts testing activities recognized under the International Laboratory Accreditation Cooperation (ILAC) and the Asia Pacific Accreditation Cooperation (APAC) through mutual recognition arrangements.
| Category | Tests |
|---|---|
| Mechanical properties | Tensile, compression, etc. |
| Physical properties | Density, hardness, etc. |
| Physicochemical properties | Chemical resistance, etc. |
| Electrical properties | Insulation resistance, dielectric strength, etc. |
| Combustion characteristics | Flame retardancy, smoke density |
| Wear resistance | Abrasion, friction |
| Aging tests | Thermal aging, UV aging, weathering |
| Fatigue life | Dynamic loading, service life simulation |
| Finished product performance | Application-specific validation |
Total floor area: 1,500 m²
Testing personnel: 30+ highly qualified engineers and polymer scientists.
Beyond routine testing, the Testing Center supports research and development through dedicated platforms, ensuring our materials adapt to the evolving demands of tropical railway networks like those in Thailand.
The Testing Center actively supports continuous R&D projects to pioneer next-generation transit solutions:
Each platform handles both material development and product-level testing, guaranteeing that our products stand up to the high dynamic loads of municipal mass transit.
Our proven track record spans hundreds of projects globally. We bring this extensive engineering experience to the Thailand market, offering localized technical support and customized manufacturing to meet the requirements of Thai transit agencies.
We have supplied high-performance vibration and noise reduction products for major transit developments globally, including:
Our entry into the Thailand market is backed by this vast international experience, adapting our technology to the specific environmental and engineering parameters of Southeast Asia.
We believe that business growth goes hand-in-hand with social responsibility and employee care. By fostering a supportive and innovative working environment, we empower our team to deliver world-class engineering solutions for our international clients, including partners in Thailand.
We care deeply for our employees and their families. Each year, we provide a 100 RMB filial piety bonus to the parents of every employee. Furthermore, children of employees admitted to colleges or universities receive an education scholarship ranging from 3,000 to 6,000 RMB. By supporting our people, we build a foundation of excellence that reflects in the high quality of our products.
We are committed to being your long-term solution partner for Thailand's railway projects, offering full-lifecycle support from design to after-sales maintenance.
Explore our complete range of CE-certified polymer components designed for mass rapid transit, high-speed rail, and industrial vibration isolation in the Thailand market.
